Displaying Device Information - Siemens SINAMICS Configuration Manual

Security measures for SINAMICS
5.6 Web server
5.6.5

Displaying device information

Click the "Device Info" entry from the navigation. The most important device information is then
shown in the display area.
Figure 5-14
You can sort the table displayed using the arrows in the column headers.
Identification and status of a component
You can identify a component of the system and display its status.
Column
Identification
Status
64
Example: Device Info display area
Description
Allows a drive object to be identified. If the entry "Identification via LED" is displayed
in this column, an LED flash test can be carried out with the drive.
As soon as you click the entry "Identification via LED", the "Ready" LED on the
corresponding component of the drive starts to flash and the component can thus
be identified.
The current status of the component is displayed in this column. Meaning:
● Red: Fault active
● Orange: Maintenance urgently required
● Yellow: Maintenance required
● Green: Component is OK.
Configuration Manual, 08/2017, A5E36912609A
Industrial Security