Siemens SINAMICS Configuration Manual page 199

Table A-45
No.
1
2
3
Table A-46
No.
1
2
3
4
Industrial Security
Configuration Manual, 08/2017, A5E36912609A
Class Attribute
Service Type
get UINT16
get UINT16
get UINT16
Instance Attribute
Service Type Name
get UINT32 Interface Speed
get ‑ Interface Flags
get ARRAY Physical Address r8935 Ethernet MAC address
get, Struct of Interface Coun‐
get_and_ ters
clear
UINT32 In Octets
UINT32 In Ucast Packets
UINT32 In NUcast Pack‐
ets
UINT32 In Discards
UINT32 In Errors
UINT32 In Unknown Pro‐
tos
UINT32 Out Octets
UINT32 Out Ucast Pack‐
ets
UINT32 Out NUcast pack‐
ets
UINT32 Out Discards
UINT32 Out Errors
Name
Revision
Max Instance
Num of Instances
Value/explanation
0: link down,
10: 10 Mbps,
100: 100 Mbps
Bit 1: Link-Status
Bit 2: Duplex Mode (0: half duplex, 1 duplex)
Bit 3 - 5: Automatic state identification
Bit 6: Reset required
Bit 7: Local hardware fault (0 = ok)
Optional, required if the "Media Counters Attribute"
is implemented.
Received octets
Received Unicast packets
Received non-Unicast packets
Incoming packets, not processed
Incoming packets with errors
Incoming packets with unknown protocol
Sent octets
Sent Unicast packets
Sent non-Unicast packets
Outgoing packets, not processed
Outgoing packets, with errors
Communication
A.1 Communication
199