A.1.3.9 Support Of I&M Data Sets 1...4 - Siemens SINAMICS Configuration Manual

Parameter Description
r2043.0...2 BO: IF1 PROFIdrive PZD status
r8843.0...2 BO: IF2 PZD status
r8936[0...1] PN state of the cyclic connection
r8937[0...5] PN diagnostics
r8960[0...2] PN subslot controller assignment
r8961[0...3] PN IP Address Remote Controller 1
r8962[0...3] PN IP Address Remote Controller 2
A.1.3.9 Support of I&M data sets 1...4
Identification & Maintenance (I&M)
I&M data sets contain information for a standardized and simplified identification and
maintenance of PROFIBUS/PROFINET devices. I&M data sets 1...4 contain plant-specific
information, such as the installation location and date. PROFINET supports I&M data sets
0...4.
I&M data sets 1...3 can be set with the SIMATIC Manager (STEP 7) and also with HW Config
(STEP 7).
I&M parameters
Table A-13 Parameter designation, assignment and meaning
I&M parameter Format
designation
I&M 0: IM_SUP‐ ‑
PORTED
I&M 1: Visible
TAG_FUNCTION string
I&M 1: TAG_LO‐ Visible
CATION string
Industrial Security
Configuration Manual, 08/2017, A5E36912609A
Size/oc‐ Initialization
tets
‑ ‑
32 Space 0x20...
0x20
22 Space 0x20...
0x20
SINAMICS pa‐ Significance
rameters
r8820[62,63] The parameter indicates which I&M data sets
are supported.
The value 0x1E indicates that I&M data sets
1...4 are available.
p8806[0...31] Text that identifies the function or task of the
device.
p8806[32...53] Text that identifies the device location.
Communication
A.1 Communication
173