A.1.3 Communication Via Profinet Io - Siemens SINAMICS Configuration Manual

Industrial security, medium-voltage converter
Hide thumbs Also See for SINAMICS:
Table of Contents

Advertisement

A.1.3
Communication via PROFINET IO
A.1.3.1
General information about PROFINET IO
General information about PROFINET IO for SINAMICS
PROFINET IO is an open Industrial Ethernet standard for a wide range of production and
process automation applications. PROFINET IO is based on Industrial Ethernet and observes
TCP/IP and IT standards.
Deterministic signal processing in real time is important in industrial networks. PROFINET IO
satisfies these requirements.
The international standard IEC 61158 ensures open, multi-vendor systems:
PROFINET IO is tuned for high-speed, time-critical data transfers at field level.
PROFINET IO
Within the context of Totally Integrated Automation (TIA), PROFINET IO is the systematic
development of the following systems:
● PROFIBUS DP, the established fieldbus,
● Industrial Ethernet, the communications bus for the cell level.
Experience gained from both systems was integrated into PROFINET IO. An Ethernet-based
automation standard defined by PROFIBUS International (PROFIBUS user organization),
PROFINET IO is a manufacturer-independent communication and engineering model.
PROFINET IO defines every aspect of the data exchange between IO controllers (devices with
so-called "master functionality" and the IO devices (devices with so-called "slave functionality")
as well as carrying out parameterization and diagnostics. A PROFINET IO system is configured
in virtually the same way as a PROFIBUS system.
A PROFINET IO system is assembled from the following devices:
● An IO controller controls automation tasks.
● An IO device is controlled and monitored by an IO controller. An IO device can consist of
several modules and submodules.
● An IO supervisor is an engineering tool, typically based on a PC, to configure e and
diagnose the individual IO devices (drive units).
IO devices: Drive units with PROFINET interface
● SINAMICS with CU320‑2 DP and inserted CBE20
● SINAMICS with CU320-2 PN
Industrial Security
Configuration Manual, 08/2017, A5E36912609A
Communication
A.1 Communication
137

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents