A.1.8.2 Messages And Parameters - Siemens SINAMICS Configuration Manual

Industrial security, medium-voltage converter
Hide thumbs Also See for SINAMICS:
Table of Contents

Advertisement

5. Reactivate the ONLINE mode.
6. Carry out a parameter download ("Target system > Load > Load project to target system")
followed by copy from RAM to ROM.
You have now changed over the converter time format to UTC format.
Application example
In the SIEMENS "Industry Online Support", for a typical application example, you can find
detailed documentation with solution strategies and matching code examples:
Time synchronization example
88231134)
A.1.8.2
Messages and parameters
Faults and alarms
Note
You can find the description of faults and alarms in the converter List Manual.
Fault number
A01099
Overview of important parameters
Note
For a description of the parameters, see the converter List Manual.
Parameter
p2048
p3100
p3101[0...1]
r3102[0...1]
p3103
p3104
r3107[0...3]
r3108[0...1]
p3109
p3116
Industrial Security
Configuration Manual, 08/2017, A5E36912609A
(https://support.industry.siemens.com/cs/de/en/view/
Message
UTC synchronization tolerance violated
Description
IF1 PROFIdrive PZD sampling time
RTC time stamp mode
Set UTC time
Display UTC time
UTC synchronization technique
BI: UTC PING synchronization
UTC synchronization time out of tolerance
UTC synchronization deviation
UTC synchronization tolerance
BI: Suppress automatic acknowledgment
Communication
A.1 Communication
221

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents