Intercom - Yealink W60P Administrator's Manual

Administrator's Guide for W60P DECT IP Phones
If it is set to 1 (Enabled), the caller identification information will be hidden and the DECT IP
phone LCD screen presents anonymous if there is a Privacy: id in the INVITE request.
Web User Interface:
None
Handset User Interface:
None

Intercom

Intercom is a useful feature in an office environment to quickly connect with the operator or
the secretary. You can make internal intercom calls and external intercom calls on the phone.
Internal intercom calls are made between handsets registered to the same base station.
External intercom calls can be made by dialing the feature access code followed by the number.
External intercom calls depend on support from a SIP server.
The handset can automatically answer an incoming external intercom call and play warning
tone only when there is only one handset subscribed and no call in progress on the handset.
To automatically answer an incoming internal intercom call, you need to enable auto intercom
feature on the handset. The following configuration types of auto intercom feature are available
for selection:
On (Beep On): Auto intercom feature is on. The handset will answer an incoming internal

intercom call automatically and play a warning tone.
On (Beep Off): Auto intercom feature is on. The handset will answer an incoming internal

intercom call automatically without a warning tone.
Off: Auto intercom feature is off. You need to answer an incoming internal intercom call

manually.
Procedure
Intercom can be configured using the following methods.
Central Provisioning
(Configuration File)
Handset User Interface
272
Parameters
y000000000077.cfg
Permitted Values
Configure incoming intercom call
feature.
Parameters:
features.intercom.headset_prior.ena
ble
custom.handset.auto_intercom
Configure incoming intercom call
feature for specified handset.
Default