Yealink W60P Administrator's Manual page 139

Details of Configuration Parameters:
phone_setting.common_power_led_enable
Description:
Enables or disables the handset power indicator LED to be turned on when the handset is
idle.
0-Disabled (handset power indicator LED is off)
1-Enabled (handset power indicator LED is solid red)
Note: It is not applicable to W52H handset.
Web User Interface:
Features->Power LED->Common Power Light On
Handset User Interface:
None
phone_setting.ring_power_led_flash_enable
Description:
Enables or disables the handset power indicator LED to flash when the handset receives an
incoming call.
0-Disabled (handset power indicator LED does not flash)
1-Enabled (handset power indicator LED fast flashes (300ms) red)
Note: It is not applicable to W52H handset.
Web User Interface:
Features->Power LED->Ringing Power Light Flash
Handset User Interface:
None
phone_setting.mail_power_led_flash_enable
Description:
Enables or disables the handset power indicator LED to flash when the handset receives a
voice mail.
0-Disabled (handset power indicator LED does not flash)
1-Enabled (handset power indicator LED slow flashes (1000ms) red)
Parameters
Configuring the Handset
Navigate to:
http://<phoneIPAddress>/servlet?p=
features-powerled&q=load
Permitted
Values
0 or 1
0 or 1
0 or 1
Default
0
1
1
119