Call Hold - Yealink W60P Administrator's Manual

1-UAS
Note: It works only if the value of the parameter "account.X.session_timer.enable" is set to 1
(Enabled).
Web User Interface:
Account->Advanced->Session Refresher
Handset User Interface:
None
To configure session timer via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
Select the desired value from the pull-down list of Session Timer.
3.
Enter the desired time interval in the Session Expires(30~7200s) field.
4.
Select the desired refresher from the pull-down list of Session Refresher.
5.
Click Confirm to accept the change.
6.

Call Hold

Call hold provides a service of placing an active call on hold. The purpose of call hold is to
pause activity on the existing call so that you can use the phone for another task (e.g., to place
or receive another call).
Parameters
Configuring Basic Features
Permitted Values Default
243