Return Code When Refuse - Yealink W60P Administrator's Manual

Administrator's Guide for W60P DECT IP Phones
To configure busy tone delay via web user interface:
Click on Features->General Information.
1.
Select the desired value from the pull-down list of Busy Tone Delay (Seconds).
2.
Click Confirm to accept the change.
3.

Return Code When Refuse

Return code when refuse defines the return code and reason of the SIP response message for
the refused call. The caller's phone LCD screen displays the reason according to the received
return code. Available return codes and reasons are:
404 (Not Found)

480 (Temporarily Unavailable)

486 (Busy Here)

603 (Decline)

Procedure
Return code for refused call can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
234
y000000000077.cfg
Specify the return code and the
reason of the SIP response
message when refusing a call.
Parameter:
features.normal_refuse_code
Specify the return code and the
reason of the SIP response
message when refusing a call.
Navigate to:
http://<phoneIPAddress>/servlet?