Block Out - Yealink W60P Administrator's Manual

Administrator's Guide for W60P DECT IP Phones
None
dialplan.area_code.line_id
Description:
Configures the desired line to apply the area code rule. The digit 0 stands for all lines. If it is
left blank, the area code rule will apply to all lines on the DECT IP phone.
Example:
dialplan.area_code.line_id = 1
Note: Multiple line IDs are separated by commas.
Web User Interface:
Settings->Dial Plan->Area Code->Account
Handset User Interface:
None
To configure an area code rule via web user interface:
Click on Settings->Dial Plan->Area Code.
1.
Enter the desired values in the Code, Min Length (1-15) and Max Length (1-15) fields.
2.
Enter the desired line ID in the Account field or leave it blank.
3.
If you leave this field blank or enter 0, the area code rule will apply to all accounts on the
DECT IP phone.
Click Confirm to accept the change.
4.

Block Out

Block out rule prevents users from dialing out specific numbers. When entered numbers match
the predefined block out rule, the LCD screen prompts "Forbidden Number". DECT IP phones
support up to 10 block out rules.
198
Parameters Permitted Values
Integer from 0 to 8
Default
Blank (for
all lines)