Yealink W60P Administrator's Manual page 298

Administrator's Guide for W60P DECT IP Phones
Procedure
SIP send MAC can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
Details of the Configuration Parameter:
account.X.register_mac
(X ranges from 1 to 8)
Description:
Enables or disables the DECT IP phone to add MAC address to the SIP header of the
REGISTER message for account X.
0-Disabled
1-Enabled
Web User Interface:
Account->Advanced->SIP Send MAC
Handset User Interface:
None
To configure SIP send MAC feature via web user interface:
Click on Account->Advanced.
1.
Select the desired account from the pull-down list of Account.
2.
278
<MAC>.cfg
Parameter
Configure SIP send MAC on a per-
line basis.
Parameter:
account.X.register_mac
Configure SIP send MAC on a per-
line basis.
Navigate to:
http://<phoneIPAddress>/servlet?p
=account-adv&q=load&acc=0
Permitted Values
0 or 1
Default
0