Yealink W60P Administrator's Manual page 83

To configure ICE feature via web user interface:
Click on Network->NAT.
1.
In the ICE block, select the desired value from the pull-down list of Active.
2.
Click Confirm to accept the change.
3.
A dialog box pops up to prompt that the settings will take effect after a reboot.
Click OK to reboot the phone.
4.
To configure NAT traversal and STUN for account via web user interface:
Click on Account->Register.
1.
Select the desired account from the pull-down list of Account.
2.
Select STUN/Manual NAT from the pull-down list of NAT.
3.
Click Confirm to accept the change.
4.
Setting Up Your System
63