Yealink W60P Administrator's Manual page 391

Parameters
(where <payload_type> should be replaced by
the name of audio codec)
Description:
Configures the priority of the enabled audio codec for account X.
The name of audio codec:
g722-G722
G726-16
g726_24-G726-24
ilbc-iLBC
Default:
When audio codec is G722, the default value is 1;
When audio codec is PCMU, the default value is 2;
When audio codec is PCMA, the default value is 3;
When audio codec is G729, the default value is 4;
When audio codec is G726_16, the default value is 0;
When audio codec is G726_24, the default value is 0;
When audio codec is G726_32, the default value is 0;
When audio codec is G726_40, the default value is 0;
When audio codec is iLBC, the default value is 0;
When audio codec is opus, the default value is 0;
Example:
account.1.codec.g722.priority = 1
Note: The priority of codec in disable codec list is not specified, and numerical value 1 is
defined as the highest priority in the enable codec list. The name of audio codec in this
parameter should be the correct one as listed in the above example, otherwise the
corresponding configuration will not take effect.
Web User Interface:
Account->Codec->Audio Codec
Handset User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs via web user
interface:
Click on Account->Codec.
1.
Select the desired account from the pull-down list of Account.
2.
Select the desired codec from the Disable Codecs column and then click
3.
The selected codec appears in the Enable Codecs column.
pcmu-PCMU pcma-PCMA
g726_32-G726-32
opus-opus
Configuring Audio Features
Permitted
Default
Values
g729-G729 g726_16-
g726_40-G726-40
.
371