Rebooting Issues - Yealink W60P Administrator's Manual

Administrator's Guide for W60P DECT IP Phones
Click Del in the Import Factory Configuration field.
2.
The web user interface prompts the message "Are you sure delete user-defined factory
configuration?".
Click OK to delete the custom factory configuration files.
3.
The imported custom factory file will be deleted. The DECT IP phone will be reset to default
factory configurations after resetting.

Rebooting Issues

How to reboot the DECT IP phone remotely?
DECT IP phones support remote reboot by a SIP NOTIFY message with "Event: check-sync"
header. Whether the DECT IP phone reboots or not depends on the value of the parameter
"sip.notify_reboot_enable". If the value is set to 1, or the value is set to 0 and the header of the
SIP NOTIFY message contains an additional string "reboot=true", the DECT IP phone will reboot
immediately.
The NOTIFY message is formed as shown:
NOTIFY sip:<user>@<dsthost> SIP/2.0
To: sip:<user>@<dsthost>
From: sip:sipsak@<srchost>
CSeq: 10 NOTIFY
Call-ID: 1234@<srchost>
Event: check-sync;reboot=true
Procedure
Changes can only be configured using the configuration files.
Central Provisioning
(Configuration File)
458
y000000000077.cfg
Configure the DECT IP phone
behavior when receiving a SIP
NOTIFY message which contains