Yealink W60P Administrator's Manual page 390

Administrator's Guide for W60P DECT IP Phones
Details of Configuration Parameters:
account.X.codec.<payload_type>.enable
(X ranges from 1 to 8)
(where <payload_type> should be replaced by
the name of audio codec)
Description:
Enables or disables the specified audio codec for account X.
0-Disabled
1-Enabled
The name of audio codec:
g722-G722
G726-16
ilbc-iLBC
Default:
When audio codec is G722, the default value is 1;
When audio codec is PCMU, the default value is 1;
When audio codec is PCMA, the default value is 1;
When audio codec is G729, the default value is 1;
When audio codec is G726-16, the default value is 0;
When audio codec is G726-24, the default value is 0;
When audio codec is G726-32, the default value is 0;
When audio codec is G726-40, the default value is 0;
When audio codec is iLBC, the default value is 0;
When audio codec is opus, the default value is 0;
Example:
account.1.codec.g722.enable = 1
Note: The name of audio codec in this parameter should be the correct one as listed in the
above example, otherwise the corresponding configuration will not take effect.
Web User Interface:
Account->Codec->Audio Codec
Handset User Interface:
None
account.X.codec.<payload_type>.priority
(X ranges from 1 to 8)
370
Parameters
pcmu-PCMU
g726_24-G726-24 g726_32-G726-32
opus-opus
Permitted
Values
0 or 1
pcma-PCMA g729-G729 g726_16-
g726_40-G726-40
Integer from 0
to 8
Default
Refer to the
following content
Refer to the
following content