Yealink W60P Administrator's Manual page 351

Parameters
Handset User Interface:
None
account.X.sip_server.Y.port
(X ranges from 1 to 8, Y ranges from 1 to 2)
Description:
Configures the port of the SIP server Y that specifies registrations for account X.
Example:
account.1.sip_server.1.port = 5060
Note: If the value of this parameter is set to 0, the port used depends on the value specified
by the parameter "account.X.sip_server.Y.transport_type".
Web User Interface:
Account->Register->SIP Server Y->Port
Handset User Interface:
OK->Settings->Telephony->Server (default PIN: 0000) ->Server Y (Account X) ->Port
account.X.sip_server.Y.expires
(X ranges from 1 to 8, Y ranges from 1 to 2)
Description:
Configures the registration expiration time (in seconds) of the SIP server Y for account X.
Example:
account.1.sip_server.1.expires = 3600
Web User Interface:
Account->Register->SIP Server Y->Server Expires
Handset User Interface:
None
account.X.sip_server.Y.retry_counts
(X ranges from 1 to 8, Y ranges from 1 to 2)
Description:
Configures the retry times for the DECT IP phone to resend requests when the SIP server Y
is unavailable or there is no response from the SIP server Y for account X.
Example:
account.1.sip_server.1.retry_counts= 3
The DECT IP phone moves to the next available server after three failed attempts.
Web User Interface:
Configuring Advanced Features
Permitted Values Default
Integer from 0 to
5060
65535
Integer from 30
3600
to 2147483647
Integer from 0 to
20
3
331