Number Assignment - Yealink W60P Administrator's Manual

Administrator's Guide for W60P DECT IP Phones
Select the desired value from the pull-down list of Call Information Display Method.
3.
Click Confirm to accept the change.
4.

Number Assignment

After the handset is registered to the base station, you can assign one or more outgoing lines
or incoming lines for the handset.
The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing
lines are assigned to the handset, the handset uses the first line as the default outgoing line.
You can change the default outgoing line of the handset.
The handset can only receive incoming calls of the assigned incoming line(s). You can assign
incoming lines to all handsets that registered to the same base station on your handset.
Procedure
Number Assignment can be configured using the following methods.
Configuration File
Web User Interface
156
y000000000077.cfg
Configure the incoming lines of
the handset.
Parameter:
handset.X.incoming_lines
Configure the outgoing lines of
the handset.
Parameter:
handset.X.dial_out_lines
Configure the default outgoing
line of the handset.
Parameter:
handset.X.dial_out_default_line
Configure the incoming lines of
the handset.
Configure the outgoing lines of
the handset.
Configure the default outgoing