Yealink W60P Administrator's Manual page 62

Administrator's Guide for W60P DECT IP Phones
Web User Interface
Handset User Interface
Details of Configuration Parameters:
static.network.ip_address_mode
Description:
Configures the IP address mode.
0-IPv4
1-IPv6
2-IPv4 & IPv6
Note: If you change this parameter, the DECT IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Basic->Internet Port->Mode (IPv4/IPv6)
Handset User Interface:
OK->Settings->System Settings->Network (default PIN: 0000) ->Basic->IP Mode
static.network.ipv6_internet_port.type
42
<MAC>.cfg
Parameters
Configure the IPv6 static DNS address.
Parameters:
static.network.ipv6_primary_dns
static.network.ipv6_secondary_dns
Configure the IPv6 static DNS.
Parameter:
static.network.ipv6_static_dns_enable
Configure the IPv6 address assignment
method.
Configure the IPv6 static DNS address.
Configure the IPv6 static DNS.
Navigate to:
http://<phoneIPAddress>/servlet?p=net
work&q=load
Configure the IPv6 address assignment
method.
Configure the IPv6 static DNS address.
Configure the IPv6 static DNS.
Permitted
Values
0, 1 or 2
0 or 1
Default
0
0