Yealink W60P Administrator's Manual page 237

Parameters
OK->Call Features->Call Waiting->Status
call_waiting.tone
Description:
Enables or disables the DECT IP phone to play the call waiting tone when the DECT IP
phone receives an incoming call during a call
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the DECT IP phone will perform an audible indicator when
receiving a new incoming call during a call.
Note: It works only if the value of the parameter "call_waiting.enable" is set to 1 (Enabled).
Web User Interface:
Features->Audio->Call Waiting Tone
Handset User Interface:
OK->Call Features->Call Waiting->Tone
call_waiting.on_code
Description:
Configures the call waiting on code to activate the server-side call waiting feature. The
DECT IP phone will send the call waiting on code to the server when you activate call
waiting feature on the DECT IP phone.
Example:
call_waiting.on_code = *71
Web User Interface:
Features->General Information->Call Waiting On Code
Handset User Interface:
None
call_waiting.off_code
Description:
Configures the call waiting off code to deactivate the server-side call waiting feature. The
DECT IP phone will send the call waiting off code to the server when you deactivate call
waiting feature on the DECT IP phone.
Example:
call_waiting.off_code = *72
Configuring Basic Features
Permitted Values
0 or 1
.
String within 32 characters
String within 32 characters
Default
1
Blank
Blank
217