Yealink W60P Quick Start Manual

Yealink DECT W56H Handset
®
and W60P Base Station
Quick Start Guide
This guide covers the basic features and operation of the
Yealink DECT W56H Handset and W60P Base Station.
®
For more information, refer to the Star2Star Knowledge
Base at knowledge.star2star.com.
Phone Screens
Yealink IP DECT W56P phone consists of one Handset
®
and one W60P Base. Three main screens are available:
• Main Menu - Displays seven menu
items: Status, Intercom, Voice Mail,
Call Features, Directory, Settings and
History. When handset is idle,
press OK to access.
• Idle - Displays soft
keys, signal
strength, battery
status, handset
name, time and
date.
Copyright © 2019, Star2Star Communications®, LLC. All rights reserved. Star2Star is a registered trademark of Star2Star Communications, LLC. Yealink is a registered trademark of Yealink, Inc.
Phone Screens - continued
• Lines - Displays Lines, Line status
(Active/Held calls, Lines' number
of calls). From Idle screen,
press Line to access.
Phone Keys
The following keys display on the phone:
Keys Functions
On-hook/Power. Powers handset off/on and
returns to previous screen when on. Cancels
actions and rejects incoming calls.
Confirms actions. Enters Main Menu.
Connects to Voicemail.
Mutes/unmutes Speaker.
Turns Speakerphone off/on. Switches
between receiver, headset, hands-free.
Transfers calls.
Left Softkey displays History.
Right Softkey displays Line Status.
Increases/decreases Volume.
Scrolls through screen options.
Off-hook. Answers and places calls.
Turn Handset On/Off
To turn on handset, do one of the following:
• Press On-hook.
• Place handset in charger cradle.
To turn off handset:
• Long-press On-hook/Power key to return to Idle
screen and turn off handset.
Place a Call
These call options are available when the handset is idle.
For multiple Lines, press Line first.
To place a call directly, do one of the following:
• Enter a phone number and OK, Speakerphone or
Off-hook to dial.
• Press Speakerphone. Enter a phone number and OK,
Speakerphone or Off-hook to dial.
Place a Call - continued
To place a call from the Redial list:
1. Press Off-hook and select a Contact.
2. Press Off-hook or Speakerphone.
To place a call to the last dialed number:
• Press Off-hook twice.
Answer a Call
To answer a call, press one of the following keys:
• Accept, Off-Hook, Speakerphone or OK.
To answer a call while on an Active call, do one of the
following:
• Press the down arrow key to select the incoming call.
• Press OK, Off-hook, Speakerphone or Accept. The
Active call is placed on Hold and the incoming call
becomes Active.
End a Call
To end a call, press On-hook.
Transfer a Call
To Transfer an Active call:
• Blind Transfer - Press TRAN. Enter a number or
Contact and TRAN.
• Attended Transfer - Press TRAN. Enter a number and
TRAN after the call is answered.
Forward a Call
The handset Forwards incoming calls on a per-line basis
to another Line.
To enable Call Forward:
1. Press OK to access the Main Menu > Call Features >
Call Forward.
2. Select a Line and Forwarding Type. (Always, Busy,
No Answer).
3. Enter a forwarding number in the Target field and
an After Ring Time, if required.
4. Press Save.
To disable call forwarding:
1. Select Menu > Features > Call Forward and a Line,
if multiple Lines.
2. Select a Forwarding Type > Enter > Disable > Save.
Forward a Call with Find Me / Follow Me:
Set up Find Me / Follow Me in Application Framework
the portal to forward calls, using the linked instructions.
or
July 2019