Yealink W60P Administrator's Manual page 345

Configuring Advanced Features
Parameters Permitted Values Default
None
multicast.receive_priority.enable 0 or 1 1
Description:
Enables or disables the DECT IP phone to handle the incoming multicast paging calls when
there is an active multicast paging call on the DECT IP phone.
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the DECT IP phone will ignore the incoming multicast paging
calls when there is an active multicast paging call on the DECT IP phone.
If it is set to 1 (Enabled), the DECT IP phone will receive the incoming multicast paging call
with a higher or equal priority and ignore that with a lower priority.
Web User Interface:
Directory->Multicast IP->Paging Priority Active
Handset User Interface:
None
multicast.receive_priority.priority Integer from 0 to 31 31
Description:
Configures the priority of the voice call (a normal phone call rather than a multicast paging
call) in progress.
1 is the highest priority, 31 is the lowest priority.
0-Disabled
1-1
2-2
3-3
4-4
5-5
6-6
7-7
8-8
9-9
10-10
11-11
12-12
325