Yealink W60P Administrator's Manual page 223

Configuring Basic Features
Parameters Permitted Values Default
None
dialplan.emergency.server.X.address
IP address or domain
Blank
name
(X ranges from 1 to 3)
Description:
Configures the IP address or domain name of the emergency server X to be used for
routing calls.
Note: If the account is registered successfully or failed (the account information has been
configured), the emergency calls will be dialed using the following priority: SIP
server>emergency server; if the account is not registered, the emergency server will be
used.
Web User Interface:
None
Handset User Interface:
None
dialplan.emergency.server.X.port
Integer from 1 to 65535 5060
(X ranges from 1 to 3)
Description:
Configures the port of emergency server X to be used for routing calls.
Web User Interface:
None
Handset User Interface:
None
dialplan.emergency.server.X.transport_type
0, 1, 2 or 3 0
(X ranges from 1 to 3)
Description:
Configures the transport method the DECT IP phone uses to communicate with the
emergency server X.
0-UDP
1-TCP
2-TLS
3-DNS-NAPTR
Web User Interface:
None
Handset User Interface:
203