Yealink W60P Administrator's Manual page 135

The LCD screen prompts "Reset base to factory configuration now?".
Press the Yes soft key.
6.
To reset the phone to factory via web user interface:
Click on Settings->Upgrade.
1.
Click Reset to factory to reset the phone.
2.
The web user interface prompts "Do you want to reset to factory?".
Click OK.
3.
After startup, all configurations of the phone will be reset to factory defaults. So the value of
the parameter "static.auto_provision.custom.sync" will be reset to 0. Configurations in the
001565770984-local.cfg file saved on the DECT IP phone will also be cleared. But configurations
in the 001565770984-local.cfg file stored on the provisioning server (tftp://192.168.1.211) will
not be cleared after reset.
To retrieve personalized settings of the phone after factory reset:
Set the values of the parameters "static.auto_provision.custom.sync" and
1.
"static.auto_provision.custom.protect" to be 1 in the configuration file (y000000000077.cfg
or 001565770984.cfg).
Trigger the phone to perform the auto provisioning process.
2.
As the value of the parameter "static.auto_provision.custom.sync" is set to 1, the DECT IP
phone will download the 001565770984-local.cfg file from the provisioning server
override the one stored on the phone. So the
will be updated and stored on the DECT IP phone during auto provisioning. As the value of
the parameter "static.auto_provision.custom.protect" is set to 1, the personalized
configuration settings will be kept after auto provisioning. As a result, the personalized
configuration settings of the phone are retrieved after factory reset.
Setting Up Your System
configurations in 001565770984-local.cfg file
to
115