Yealink W60P Administrator's Manual page 89

Procedure
QoS can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
Details of Configuration Parameters:
Parameters
static.network.qos.audiotos
Description:
Configures the DSCP (Differentiated Services Code Point) for voice packets.
The default DSCP value for RTP packets is 46 (Expedited Forwarding).
Note: If you change this parameter, the DECT IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->Voice QoS (0~63)
Handset User Interface:
None
static.network.qos.signaltos
Description:
Configures the DSCP (Differentiated Services Code Point) for SIP packets.
The default DSCP value for SIP packets is 26 (Assured Forwarding).
Note: If you change this parameter, the DECT IP phone will reboot to make the change
take effect.
Web User Interface:
Network->Advanced->SIP QoS (0~63)
y000000000077.cfg
Setting Up Your System
Configure the DSCPs for voice
packets and SIP packets.
Parameters:
static.network.qos.audiotos
static.network.qos.signaltos
Configure the DSCPs for voice
packets and SIP packets.
Navigate to:
http://<phoneIPAddress>/servlet?p
=network-adv&q=load
Permitted Values
Integer from 0 to 63
Integer from 0 to 63
Default
46
26
69