Yealink W60P Administrator's Manual page 476

Administrator's Guide for W60P DECT IP Phones
The web user interface prompts the message "Do you want to reset to factory?".
Click OK to confirm the resetting.
3.
The DECT IP phone will be reset to factory sucessfully after startup.
Reset of your phone may take a few minutes. Do not power off until the phone starts up
Note
successfully.
How to reset the DECT IP phone to custom factory configurations?
Procedure
Configuration changes can be performed using the following methods.
Central
Provisioning
(Configuration
File)
Web User Interface
Details of Configuration Parameters:
static. features.custom_factory_config.enable
Description:
Enables or disables the
0-Disabled
1-Enabled
If it is set to 1 (Enabled), Import Factory Config item will be displayed on the DECT IP phone's
web user interface at the path Settings->Configuration. You can import a custom factory
configuration file or delete the user-defined factory configuration via web user interface.
Web User Interface:
456
Configure the Custom Factory Configuration
feature.
Parameter:
static.features.custom_factory_config.enable
y000000000077.cfg
Configure the access URL of the custom
factory configuration files.
Parameter:
static.custom_factory_configuration.url
Configure the access URL of the custom
factory configuration files.
Navigate to:
http://<phoneIPAddress>/servlet?p=settings
-config&q=load
Parameters
Custom Factory Configuration
Permitted
Values
0 or 1
feature.
Default
0