Yealink W60P Administrator's Manual page 50

Administrator's Guide for W60P DECT IP Phones
Details of Configuration Parameters:
static.wui.http_enable
Description:
Enables or disables the user to access web user interface of the DECT IP phone using the
HTTP protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the DECT IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTP
Handset User Interface:
None
static.network.port.http
Description:
Configures the HTTP port for the user to access web user interface of the DECT IP phone
using the HTTP protocol.
Note: Please take care when choosing an alternate port. If you change this parameter, the
DECT IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Web Server->HTTP Port(1~65535)
Handset User Interface:
None
static.wui.https_enable
Description:
Enables or disables the user to access web user interface of the DECT IP phone using the
HTTPS protocol.
0-Disabled
1-Enabled
30
Parameters
Navigate to:
http://<phoneIPAddress>/servlet?p=
network-adv&q=load
Permitted Values
0 or 1
Integer from 1 to 65535
0 or 1
Default
1
80
1