Yealink W60P Administrator's Manual page 250

Administrator's Guide for W60P DECT IP Phones
Procedure
DND can be configured using the following methods.
Central Provisioning
(Configuration File)
Web User Interface
Handset User Interface
Details of Configuration Parameters:
account.X.dnd.enable
(X ranges from 1 to 8)
Description:
Triggers DND feature to on or off for account X.
0-Off
1-On
If it is set to 1 (On), the DECT IP phone will reject incoming calls on account X.
Web User Interface:
Features->Forward&DND->DND->DND Status
Handset User Interface:
OK->Call Features->Do Not Disturb->LineX->Status
account.X.dnd.on_code
(X ranges from 1 to 8)
Description:
Configures the DND on code to activate the server-side DND feature for account X.
The DECT IP phone will send the DND on code to the server when you activate DND feature
for account X on the DECT IP phone.
230
<MAC>.cfg
y000000000077.cfg
Parameters
Configure DND feature.
Parameters:
account.X.dnd.enable
account.X.dnd.on_code
account.X.dnd.off_code
Configure the DND refuse code.
Parameter:
features.dnd_refuse_code
Configure DND feature.
Navigate to:
http://<phoneIPAddress>/servlet?p=f
eatures-forward&q=load
Configure DND feature.
Permitted Values
0 or 1
String within 32
characters
Default
0
Blank