Programming The First Part; Selecting The Correct Operating Mode; The Most Important Control Keys - HEIDENHAIN TNC 640 User Manual

1
1.3

Programming the first part

Selecting the correct operating mode

You can write programs only in Programming mode:
Press the operating mode key
The control switches to the Programming mode
of operation.
Further information on this topic
Operating modes
Further information:

The most important control keys

Key Functions for conversational guidance
Confirm entry and activate the next dialog
prompt
Ignore the dialog question
NO
ENT
End the dialog immediately
Abort dialog, discard entries
Soft keys on the screen with which you select
functions appropriate to the active operating
state
Further information on this topic
Writing and editing programs
Further information:
Overview of keys
Further information:
70
"Programming", page 96
"Editing an NC program", page 169
"Controls and displays", page 2
First Steps with the TNC 640 | Programming the first part
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017