Low Power/Auto Shutdown B Days Enable "Lpsb - ALLIANCE BF3LLFSG401UN01 Programming Manual

Programming Control
27. Low Power/Auto Shutdown B
Days Enable "LPSb"
This option allows the owner to set Low Power/Auto
Shutdown on certain day(s) of the week. Low Power
or Auto Shutdown duration are programmed using an
external device or network.
How to Program the Low Power/Auto
Shutdown B Days Enable
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until "Prog" appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable options until "LPSb" appears in
the display.
4. When "LPSb" appears in the display, press the
START (enter) keypad. The current Low Power/
Auto Shutdown B Days Enable status will appear
in the display.
"on" = Option Enabled
"oFF" = Option Disabled (factory default
setting)
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display. The next option,
"LPSC", will appear in the display.
NOTE: To program "LPSC" (Low Power/Auto
Shutdown C Days Enable), refer to option 28. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
78 © Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
28. Low Power/Auto Shutdown C
Days Enable "LPSC"
This option allows the owner to set Low Power/Auto
Shutdown on certain day(s) of the week. Low Power
or Auto Shutdown duration are programmed using an
external device or network.
How to Program the Low Power/Auto
Shutdown C Days Enable
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad until "Prog" appears in the
display. Press the START (enter) keypad and
"AtS1" will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable options until "LPSC" appears in
the display.
4. When "LPSC" appears in the display, press the
START (enter) keypad. The current Low Power/
Auto Shutdown C Days Enable status will appear
in the display.
"on" = Option Enabled
"oFF" = Option Disabled (factory default
setting)
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to change the current status.
6. Press the START (enter) keypad when the correct
status appears in the display. The next option,
"LPSd", will appear in the display.
NOTE: To program "LPSd" (Low Power/Auto
Shutdown D Days Enable), refer to option 29. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
802953