Networkservices Settings; Networkservices Cdp Mode; Networkservices H323 Mode; Networkservices Http Mode - Cisco TelePresence SX20 Quick Set Administrator's Manual

Cisco TelePresence SX20 Quick Set

Introduction

NetworkServices settings

NetworkServices CDP Mode

Enable or disable the CDP (Cisco Discovery Protocol) daemon. Enabling CDP will make the
endpoint report certain statistics and device identifiers to a CDP-enabled switch. If CDP is
disabled, the Network VLAN Voice Mode: Auto setting will not work.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: The CDP daemon is disabled.
On: The CDP daemon is enabled.

NetworkServices H323 Mode

Define whether the system should be able to place and receive H.323 calls or not.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: Disable the possibility to place and receive H.323 calls.
On: Enable the possibility to place and receive H.323 calls (default).
D15329.03 SX20 Administrator Guide CE8.2, JUNE 2016.
Configuration Peripherals Maintenance

NetworkServices HTTP Mode

Define whether or not to allow access to the video system using the HTTP or HTTPS (HTTP
Secure) protocols. Note that the video system's web interface use HTTP or HTTPS. If this
setting is switched Off, you cannot use the web interface.
If you need extra security (encryption and decryption of requests, and pages that are
returned by the web server), allow only HTTPS.
Requires user role: ADMIN
Default value: HTTP+HTTPS
Value space: Off/HTTP+HTTPS/HTTPS
Off: Access to the video system not allowed via HTTP or HTTPS.
HTTP+HTTPS: Access to the video system allowed via both HTTP and HTTPS.
HTTPS: Access to the video system allowed via HTTPS, but not via HTTP.

NetworkServices HTTPS VerifyServerCertificate

When the video system connects to an external HTTPS server (like a phone book server
or an external manager), this server will present a certificate to the video system to identify
itself.
Requires user role: ADMIN
Default value: Off
Value space: Off/On
Off: Do not verify server certificates.
On: Requires the system to verify that the server certificate is signed by a trusted
Certificate Authority (CA). This requires that a list of trusted CAs are uploaded to the
system in advance.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
100
Administrator Guide
System settings System settings Appendices