Segger J-Link User Manual page 95

Example
jlinkgdbserver -TelnetPort 2554
3.3.5.27 -vd
Description
Verifys the data after downloading it.
Note: For the GUI version, this setting is persistent for following uses of GDB
Server until changed via command line option or the GUI.
Syntax
-vd
3.3.5.28 -x
Description
Starts the GDB Server with a gdbinit (configuration) file. In contrast to the -xc com-
mand line option the GDB Server runs the commands in the gdbinit file once only
direct after the first connection of a client.
Syntax
-x <ConfigurationFilePath>
Example
jlinkgdbserver -x C:\MyProject\Sample.gdb
3.3.5.29 -xc
Description
Starts the GDB Server with a gdbinit (configuration) file. GDB Server executes the
commands specified in the gdbinit file with every connection of a client / start of a
debugging session.
Syntax
-xc <ConfigurationFilePath>
Example
jlinkgdbserver -xc C:\MyProject\Sample.gdb
J-Link / J-Trace (UM08001) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG
95