Iar: J-Trace; Nxp: J-Link Lite Lpc Edition; Segger: J-Link Lite Arm - Segger J-Link User Manual

58
2.5.6

IAR: J-Trace

IAR J-Trace is an OEM version of J-Trace, sold by IAR.
Limitations
IAR J-Trace can not be used with Keil MDK. This limitation can NOT
be lifted; if you would like to use J-Trace with Keil MDK, you need
to buy a separate J-Trace.
Licenses
No licenses are included. All licenses can be added.
2.5.7

NXP: J-Link Lite LPC Edition

J-Link Lite LPC Edition is an OEM version of J-Link, sold by NXP.
Limitations
J-Link Lite LPC Edition only works with NXP devices. This limita-
tion can NOT be lifted; if you would like to use J-Link with a
device from an other manufacturer, you need to buy a separate
J-Link.
Licenses
No licenses are included.
2.5.8

SEGGER: J-Link Lite ARM

J-Link Lite ARM is a fully functional OEM-version of SEGGER J-
Link. If you are selling evaluation-boards, J-Link Lite ARM is an
inexpensive emulator solution for you. Your customer receives a
widely acknowledged JTAG-emulator which allows him to start
right away with his development.
Limitations
JTAG speed is limited to 4 MHz
Licenses
No licenses are included. All licenses can be added.
Note
J-Link Lite ARM is only delivered and supported as part of Starter Kits. It is not sold
to end customer and not guaranteed to work with custom hardware.
J-Link / J-Trace (UM08001)
CHAPTER 2
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG
Licensing