J-Link Rdi (Remote Debug Interface); Flash Download And Flash Breakpoints - Segger J-Link User Manual

110

3.10 J-Link RDI (Remote Debug Interface)

The J-Link RDI software is an remote debug interface for J-Link. It makes it possible
to use J-Link with any RDI compliant debugger. The main part of the software is an
RDI-compliant DLL, which needs to be selected in the debugger. There are two addi-
tional features available which build on the RDI software foundation. Each additional
features requires an RDI license in addition to its own license. Evaluation licenses are
available free of charge. For further information go to our website or contact us
directly.
Note: The RDI software (as well as flash breakpoints and flash downloads) do
not require a license if the target device is an LPC2xxx. In this case the software ver-
ifies that the target device is actually an LPC 2xxx and have a device-based license.

3.10.1 Flash download and flash breakpoints

Flash download and flash breakpoints are supported by J-Link RDI. For more infor-
mation about flash download and flash breakpoints, please refer to J-Link RDI User's
Guide (UM08004), chapter Flash download and chapter Breakpoints in flash memory.
J-Link / J-Trace (UM08001)
CHAPTER 3 J-Link software and documentation package
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG