Configuration; Configuration File Jlinkrdi.ini; Using Different Configurations; Using Mutliple J-Links Simulatenously - Segger J-Link User Manual

224
8.4

Configuration

This section describes the generic setup of J-Link RDI (same for all debuggers) using
the J-Link RDI configuration dialog.
8.4.1

Configuration file JLinkRDI.ini

All settings are stored in the file JLinkRDI.ini . This file is located in the same direc-
tory as JLinkRDI.dll .
8.4.2

Using different configurations

It can be desirable to use different configurations for different targets. If this is the
case, a new folder needs to be created and the JLinkARM.dll as well as the
JLinkRDI.dll needs to be copied into it.
Project A needs to be configured to use JLinkRDI.dll A in the first folder, project B
needs to be configured to use the DLL in the second folder. Both projects will use
separate configuration files, stored in the same directory as the DLLs they are using.
If the debugger allows using a project-relative path (such as IAR EWARM: Use for
example $PROJ_DIR$\RDI\ ), it can make sense to create the directory for the DLLs
and configuration file in a subdirectory of the project.
8.4.3

Using mutliple J-Links simulatenously

Same procedure as using different configurations. Each debugger session will use
their own instance of the JLinkRDI.dll .
8.4.4

Configuration dialog

The configuration dialog consists of several tabs making the configuration of J-Link
RDI very easy.
J-Link / J-Trace (UM08001)
CHAPTER 8
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG
RDI