Segger J-Link User Manual page 190

190
First, choose the device in the project settings if not already done. The device set-
tings can be found at Project->Options for Target->Device.
To enable the J-Link flash loader J-Link / J-Trace at Project->Options for Tar-
get->Utilities has to be selected. It is important that "Update Target before Debug-
ging" is unchecked since otherwise uVision tries to use its own flashloader.
J-Link / J-Trace (UM08001)
CHAPTER 6
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG
Flash download