Segger J-Link User Manual page 87

Following additional command line options are available. These options are tempo-
rary for each start of GDB Server.
Command line option
-jtagconf
-log
-notimeout
-singlerun
-scriptfile
-select
-settingsfile
-x
-xc
-cpu
Table 3.8: General command line options
J-Link / J-Trace (UM08001)
Configures a JTAG scan chain with multiple devices on it.
Log the GDB Server communication to a specific file.
Do not close GDB Server when target connection fails.
Start GDB Server in single run mode.
Use a J-Link scriptfile.
Select the interface to connect to J-Link (USB/IP).
Select the J-Link Settings File.
Execute a gdb file on first connection.
Execute a gdb file on every connection.
Select the CPU core. Deprecated, use
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG
Explanation
-device
87
instead.