Segger J-Link User Manual page 231

8.4.4.6 CPU tab
Instruction set simulation
This enables instruction set simulation which speeds up single stepping instructions
especially when using flash breakpoints.
Reset strategy
This defines the behavior how J-Link RDI should handle resets called by software.
J-Link supports different reset strategies. This is necessary because there is no single
way of resetting and halting an ARM core before it starts to execute instructions.
For more information about the different reset strategies which are supported by J-
Link and why different reset strategies are necessary, please refer to Reset strategies
on page 157.
8.4.4.7 Log tab
A log file can be generated for the J-Link DLL and for the J-Link RDI DLL. This log
files may be useful for debugging and evaluating. They may help you to solve a prob-
lem yourself but is also needed by the support to help you with it.
Default path of the J-Link log file: c:\JLinkARM.log
Default path of the J-Link RDI log file: c:\JLinkRDI.log
J-Link / J-Trace (UM08001) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG
231