Segger J-Link User Manual page 180

180
Example
exec SupplyPower = 1
exec map reset
exec map exclude 0x10000000-0x3FFFFFFF
5.11.2.2 IAR Embedded Workbench
The J-Link command strings can be supplied using the C-SPY debugger of the IAR
Embedded Workbench. Open the Project options dialog box and select Debugger.
On the Extra Options page, select Use command line options.
Enter --jlink_exec_command "<CommandLineOption>" in the textfield, as shown in
the screenshot below. If more than one command should be used separate the com-
mands with semicolon.
J-Link / J-Trace (UM08001)
CHAPTER 5
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG
Working with J-Link and J-Trace