Segger J-Link User Manual page 196

196
ware utilities available which allow data file conversion. Another possibility is to use
J-Flash which is part of the J-Link software and documentation package. For convert-
ing data files, no J-Flash license is needed.
In order to convert a hex/mot/... file into a bin file using J-Flash, the following needs
to be done:
1. Start J-Flash
2. Click File | Open data file... to open the data file to be converted in J-Flash.
3. Click File | Save data file as...
4. Select Binary file (*.bin) as file type so J-Flash knows that the file shall be saved
as binary (bin) file.
5. Click Save
J-Link / J-Trace (UM08001)
CHAPTER 6
© 2004-2013 SEGGER Microcontroller GmbH & Co. KG
Flash download