Rdi - Segger J-Link User Manual

Chapter 8

RDI

RDI (Remote Debug Interface) is a standard defined by ARM, trying to standardize a
debugger / debug probe interface. It is defined for cores only that have the same
CPU register set as ARM7 CPUs. This chapter describes how to use the RDI DLL which
comes with the J-Link software and documentation package. The J-Link RDI DLL
allows the user to use J-Link with any RDI-compliant debugger and IDE.
J-Link / J-Trace (UM08001) © 2004-2013 SEGGER Microcontroller GmbH & Co. KG
205