Machine Id Settings - Pitney Bowes 2030 Manual

5.7.3 Machine ID Settings

The Machine ID Settings are as follows:
•
Transmit ID Name – Along with the programmed Date/Time, the
programmed name (e.g., company name) prints at the top of each
transmitted page as part of the "header" on all received faxes, as well as
remote reports, thus identifying the sender/unit.
•
This Fax Number – The programmed fax number also prints at the top
of each transmitted page (see above).
To view or adjust Machine ID Settings, proceed as follows:
Do This
1. Press FEATURES.
2. Press 8 and then YES.
3. Press YES.
4. The Model 2030 has been defaulted to SECURE
MACHINE SETTINGS. This feature can be turned off
by calling the Diagnostic Center.
ACCESS CODE, if required and press YES. The
default ACCESS CODE is 2030.
Press NO or t (Edit Jobs key) to bypass MACHINE
5.
SETTINGS.
6. Press YES to select MACHINE ID SETTINGS
Press YES to enter/edit the ID Name (or press t t to
7.
move to the next item).
8. Enter the desired Name (up to 21 characters) via the
alphabetic (One-Touch keys) and numeric keys. (A
space or hyphen can also be entered via the One-
Touch keys.)
Note: To delete characters, press NO. To overstrike
characters, use the cursor keys to move left (t t ) or
right (u u ) and enter correct information.
This Happens
Enter your
.
PRESS YES, NO OR t t s s
XYZ COMPANY
90
FEATURE SELECTIONS
PRESS YES, NO OR t t s s
SET UP SYSTEM ?
PRESS YES, NO OR t t s s
ENTER ACCESS CODE
_ _ _ _
MACHINE SETTINGS?
PRESS YES, NO OR t t s s
MACHINE ID SETTING?
PRESS YES, NO OR ts
TRANSMIT ID NAME?
ENTER TRANSMIT ID
z
TRANSMIT ID NAME