Pitney Bowes 2030 Manual page 118

To store mail locally:
Do This
1. Insert the document face down in the Document
Feeder.
2. Press FEATURES.
Press 3 or t t three times and then YES.
3.
4. Press YES.
5. Press 2 then YES.
6. Enter the two-digit number of the Mailbox you want
to store mail in.
7. Press YES after entering the Mailbox number.
8. If the correct Mailbox name is displayed, press YES.
9. A Mailbox
automatically.
Mailbox #, addressee (Mailbox name), the name of
the sender and the number of pages stored. Refer to
Section 5.6.4, #4 and #5 for additional information.
NOTES:
1. The mail will remain stored in the Mailbox until retrieved by an authorized
individual. When an authorized person prints the mail (by following directions
in Section 6.2.3), it is erased from memory after printing. If a remote fax
operator retrieves the mail, the Model 2030 will normally erase it from
memory. If you would like the Model 2030 to save all mail in the Mailboxes
indefinitely until purposely erased by a user or Key Operator, please call the
Pitney Bowes Diagnostic Center listed in the back of this Guide. This feature
Confirmation Report
This Report lists the date, time
This Happens
The number appears in the
display.
is printed The document is scanned into
the Mailbox(es) you specified.
113
ENTER
DESTINATION(S)
FEATURE SELECTIONS
PRESS YES, NO OR t t s s
MAILBOX ACCESS?
PRESS YES, NO OR t t s s
1=PRINT 2=STORE
3=SET UP 4=DIRECTORY
LOCAL MAILBOX
ENTER MAILBOX # _ _
#XX: NAME
JOB #010 TO MEMORY
PAGE.1
MAILBOX CONFIRMATION
PRINTING NOW
?