Pitney Bowes 2030 Manual page 28

To adjust the cassette paper size (LTR, LGL or A4), proceed as follows:
1
2
3
4
1. First, remove the cassette...
•
Pull straight out until it stops.
•
Grasp each end of the cassette
and lift up slightly, while pulling,
as shown by the arrow.
2. Adjust the
(green) to the paper length. For LGL
size paper, remove the Paper Length
Guide and store it in the provided slot
in the front left side of the paper
cassette. Note: See illustration inside
of cassette.
3. Reposition the Paper Size Selector
(green) at the rear of the cassette.
This Selector will tell the 2030 which
paper size is loaded in the cassette.
•
Release the clip and remove the
Paper Size Selector.
•
Rotate the Paper Size Selector
until the
marked on the Selector is facing
upward
upright, e.g., LGL.
•
Reinstall the Paper Size Selector.
4. If changing paper from LTR/LGL to
A4 width, (or vice versa) adjust the
Paper Width Guide and Clip to the
new paper size. The factory default
for the Width Guide and Clip are in
the LTR/LGL position.
23
Paper Length
appropriate
and the wording
Guide
setting
is