Pitney Bowes 2030 Manual page 98

10. Press 1 if you want to see only calls dialed by this
machine or press 2 if you want to see all
communications (sent and received). Press YES to
continue.
11. Press YES to select what will print in the Journal ID
Field (or press t t to move to the next item).
Press:
•
1=Remote ID Name
•
2=Remote Telephone Number
•
3=Dialed Name (as programmed in your 2030)
•
4=Dialed Telephone Number
Press YES to continue.
12. Press YES to select the Journal Print (or press t t to
move to the next item).
13. Press 1 to turn the Journal OFF or press 2 to print
the Journal only when full (default setting) or press
3 to enter a time at which the report should print
every day. For example, press 3 and then YES.
14. Enter the time at which the Journal is to print, e.g.,
5:00 pm = 17:00. Press YES to continue.
15. Press YES to select Journal Send (or press t t to
move to the next item).
16. Enter the 3-digit Speed Dial number to which you
want the Journal automatically sent, e.g., 001.
To change a previously selected Speed Dial number,
press NO to erase the old Speed Dial number/name
and enter new Speed Dial number.
17. Press YES.
18. Press STOP to return to System Ready mode.
If you wish to print a System Set Up Report,
showing the revised settings, press the REPORTS
key. Press the down arrow key (q q ) until SYSTEM
SET UP REPORT appears in the display. Press YES.
PRESS YES, NO OR t t s s
PRESS
PRESS
PRESS YES, NO OR t t s s
1=OFF 2=FULL 3=TIME
PRESS YES, NO OR t t s s
001: MAIN OFFICE
PRESS YES, NO OR t t s s
93
JNL ID FIELD?
JNL ID FIELD
REMOTE:1=NAME 2=TEL q q
JNL ID FIELD
DIALED:3=NAME 4=TEL p p
JNL PRINT?
JNL PRINT?
ENTER PRINT TIME
17:00
JNL SEND?
ENTER SPEED DIAL #
z
SEND JOURNAL TO
JOB STATUS?
JAN 10 2001 10:00
SYSTEM READY