Pitney Bowes 2030 Manual page 43

Up to 30 jobs can be entered by the AutoDial method. See Section 5.3 for the
procedures to enter other types of Programmable AutoDial Jobs.
Do This
1. Insert the document face down in the Automatic
Document Feeder. Then press FEATURES twice.
2. Press YES.
3. Press 1, then press YES.
4. Enter the destination(s) in one of the following
ways:
- a phone number from the Numeric Keypad,
- a previously stored Speed Dial number,
- a previously programmed One-Touch key.
If a mistake is made, press NO to backspace and
erase incorrect digits or use the cursor keys to
move the cursor to the incorrect digit and simply
enter the correct digit.
5. Press YES after checking that your entry is correct
(if you entered a Speed Dial number, press YES a
second time).
6. Press NO to proceed or press YES and enter
another number by one of the methods mentioned in
Step #4 above.
entered.
7. Enter the number corresponding to the correct
resolution and then press YES. Or just press YES
for Normal resolution mode.
8. Enter the time* to send the document and then
press YES or just press YES to begin sending now.
*Note: Enter using "Military" format, e.g., 11:00 PM
is entered as 23:00.
Repeat until all numbers are
This Happens
ENTER YES, NO OR t t s s
1=SND, 2=RCV, 3=RELAY
4=SND/RCV, 5=MAILBOX δ δ
ENTER DESTINATION#
z
#01: MARKETING
1=NORM
3=EXTRA FINE 4=U-FINE
38
AUTO DIAL?
ANOTHER NUMBER?
ENTER YES OR NO
2=FINE
ENTER TIME
_ _:_ _