Pitney Bowes 2030 Manual page 93

To view or adjust Machine Settings, proceed as follows:
Do This
1. Press FEATURES.
2. Press 8 and then YES.
3. Press YES.
4. The Model 2030 has been defaulted to SECURE
MACHINE SETTINGS. This feature can be turned off
by calling the Diagnostic Center. Enter your ACCESS
CODE, if required and press YES.
ACCESS CODE is 2030.
5. Press YES to select MACHINE SETTINGS. Press YES
again to program or change the Date or Time (or t t to
move to the next item).
6. Program or change the date and/or time in month/
day/year/ hours/minutes order.
JAN. 10, 2001,
011020011628.
If you want to change an existing date: Individual
corrections can be made using the u u and t t arrow
cursor keys to move the item you wish to change 
remember to enter the time in military fashion. Enter
numbers for the months you want: 01=Jan, 02=Feb,
03=Mar, etc.
There is no need to set the time ahead or back to
accommodate daylight savings.
daylight/standard time shift feature will take place on
the first Sunday of April (one hour ahead) and the last
Sunday in October (one hour back). (Note: This
feature can be turned off for areas that do not use
DST.)
7. Press YES when the date and time are complete.
Press YES to change the Beep Volume (or t t to move
8.
to the next item).
For example, for
4:28 p.m., you
The Automatic
This Happens
FEATURE SELECTIONS
PRESS YES, NO OR t t s s
PRESS YES, NO OR t t s s
PRESS YES, NO OR t t s s
The default
PRESS YES, NO OR t t s s
JAN 10 2001
would enter:
The new Date and Time
appear in the display as you
enter them.
PRESS YES, NO OR t t s s
OFF t t
88
SET UP SYSTEM ?
ENTER ACCESS CODE
_ _ _ _
MACHINE SETTINGS?
DATE/TIME ?
ENTER DATE/TIME
16:28
BEEP VOLUME ?
BEEP VOLUME
u u
--*-- HI