Sending To A Mailbox With Programmable Autodial Jobs - Pitney Bowes 2030 Manual

10. Enter the time to begin the transmission, then press
YES. Or just press YES to begin the transmission.
NOTES:
1. If a Passcode is required by the remote fax, you must be sure that the
Passcode of your machine matches that of the remote machine or you will
not be able to receive from the other unit. When Turnaround Polling, your
machine uses the polling Passcode that is programmed in the SET-UP
SYSTEM Feature.
2. Turnaround Polling may or may not work with non-Pitney Bowes machines.

5.3.5 Sending to a Mailbox with Programmable AutoDial Jobs

A Mailbox is a storage space in the memory that only an authorized user can
access. If the proper Mailbox Security Access and procedures are followed, your
Model 2030 can send documents to another compatible Pitney Bowes fax
machine Mailbox. For more information on setting up Mailboxes, refer to Section
6.2, "Mailbox Functions" for all associated procedures.
To send a document to a Mailbox using a Programmable AutoDial Job:
Do This
1. Insert the document face down in the Automatic
Document Feeder and press FEATURES twice.
2. Press YES.
3. Press 5, then press YES
4. Enter the Mailbox number and then press YES.
The document(s) is scanned
into
tically
specified (or immediately if no
time was specified).
pages are sent, the pages from
the remote fax are automa-
tically
same telephone call.
This Happens
69
JOB #016 TO MEMORY
PAGE.1
memory and
sent at the
received during
AUTO DIAL?
PRESS YES, NO OR
1=SND, 2=RCV, 3=RELAY
4=SND/RCV, 5=MAILBOX
ENTER MAILBOX #_ _
ENTER DESTINATION#
z
automa-
time(s)
After
the
ts