Pitney Bowes 2030 Manual page 14

9. AC 120V Power Cord  for attachment to the Model 2030 AC Power
Socket. The Power Cord must be plugged into a wall outlet to power the
system. (Note for U.K.: This is 240VAC.)
10. ON/OFF Switch  This powers the unit ON ( | ) or OFF ( 0 ). Switch is
located at the lower right rear of the unit (when viewed from the rear).
11. RJ-11C Telephone Line  A Telephone line cord connects this jack to a
similar wall jack for attachment to a phone line. (Not applicable in U.K.)
12. RJ-11C Extension Telephone Line  Used if attachment of a customer
provided extension telephone is required. (Not applicable in U.K.)
13. Optional IEEE 1284 Parallel Port  This port is used to connect cables if
the Printer Driver and/or HydraFax options are installed. (Call your local
Pitney Bowes Office for additional information.)
14. Ringer Volume Switch  The three-position Ringer Volume Switch allows
you to adjust the volume (loudness) of the rings generated from your unit
when someone calls it. Moving the Switch increases and decreases the
volume. (Not applicable in U.K.)
13
9
14
10
9
11
12
20