Pitney Bowes 2030 Manual page 101

3. Press YES.
4. The Model 2030 has been defaulted to SECURE
MACHINE SETTINGS. This feature can be turned off
by calling the Diagnostic Center.
ACCESS CODE, if required and press YES. The
default ACCESS CODE is 2030.
Press NO or t (Edit Jobs key) three times.
5.
6. Press YES to select JOB SETTINGS
Press YES or NO (or press t t to move to the next
7.
item).
Press YES or NO (or press t t to move to the next
8.
item).
Press YES or NO (or press t t to move to the next
9.
item).
10. Press YES or NO (or press t t to move to the next
item).
11. Press YES or NO (or press t t to move to the next
item). For example, press YES. Enter the new One
Touch Start Delay, e.g., 1. Press YES.
12. Press YES or NO (or press t t to move to the next
item).
13. Press STOP to return to System Ready mode.
If you wish to print a System Set Up Report,
showing the revised settings, press the REPORTS
key. Press the down arrow key (q q ) until SYSTEM
SET UP REPORT appears in the display. Press YES.
Enter your
.
96
ENTER ACCESS CODE
_ _ _ _
MACHINE SETTINGS?
PRESS YES, NO OR t t s s
JOB SETTINGS?
PRESS YES, NO OR ts
SAVE INCOMP. JOBS?
PRESS YES, NO OR ts
SAVE STOPPED JOBS?
PRESS YES, NO OR ts
SCAN TO MEMORY?
PRESS YES, NO OR ts
SEND COVER SHEET?
PRESS YES, NO OR ts
OT START DELAY?
PRESS YES, NO OR ts
OT START DELAY: 5sec
ENTER NUMBER (0-15)
CONFIRM JOBS REPORT?
PRESS YES, NO OR ts
JAN 10 2001
SYSTEM READY
10:00