Pitney Bowes 2030 Manual page 97

•
Job Status Report – The Job Status Report confirms whether or not a
Job was successfully completed. The settings include:
- OFF – The report will not print.
- ALL – Prints after every Job.
- INC. – Prints only when Jobs are incomplete. This is the default.
- ON DEMAND – When transmitting, the display will prompt you as to
whether or not you wish to print a Job Status Report.
To view or adjust Journal Settings, proceed as follows:
Do This
1. Press FEATURES.
2. Press 8 and then YES.
3. Press YES.
4. The Model 2030 has been defaulted to SECURE
MACHINE SETTINGS. This feature can be turned off
by calling the Pitney Bowes Diagnostic Center.
Enter your ACCESS CODE, if required and press
YES. The default ACCESS CODE is 2030.
Press NO or t t (Edit Jobs key) twice.
5.
6. Press YES to select REPORT SETTINGS
Press YES to select Journal Format (or press t t to
7.
move to the next item).
8. Press 1 if you want the Journal formatted by time or
Press 2 to group by send and receive transactions.
Press YES to continue.
Press YES to select Journal Display (or press t t to
9.
move to the next item).
This Happens
PRESS YES, NO OR t t s s
.
PRESS YES, NO OR t t s s
PRESS YES, NO OR t t s s
92
FEATURE SELECTIONS
PRESS YES, NO OR t t s s
SET UP SYSTEM ?
PRESS YES, NO OR t t s s
ENTER ACCESS CODE
_ _ _ _
MACHINE SETTINGS?
PRESS YES, NO OR t t s s
REPORT SETTING?
JNL FORMAT?
JNL FORMAT
1=TIME 2=SND/RCV
JNL DISPLAY?
JNL DISPLAY
1=ORIGINATED 2=ALL